ExcelFil™ – High Grade PLA and ABS 3D Printing Filaments
Voltivo’s ExcelFil™ is a high grade, high-density 3D printing filament available in both PLA, ABS for your everyday 3D printing jobs. ExcelFil™ is perfectly suited for and tested with a wide range of 3D printers.
ExcelFil™ PLA and ABS filaments allow for easy extrusion due to their tight laser-controlled tolerances, smooth flow characteristics over a large temperature range, rapid cooling, and a high tensile strength.
ExcelFil™ comes in a wide range of colors and in two diameters that fit many brands of printers. Voltivo ships ExcelFil™ on sturdy recyclable spools, vacuum sealed with a desiccant bag to ensure it arrives moisture-free.
Primary Features and Benefits
- Diameter and Roundness accuracy better than 0.05mm
- Fully opaque color with a shiny finish, no shortcuts taken on adding non-toxic color pigments
- Only A grade PLA/ABS raw plastic materials from USA and German suppliers, no scrap or recycled source material
- Formulated for low printing temperature, thus allowing for less blobbing and stringing
- Strong layer bonds – very rigid when cooled
- Support website with tested print temperature guidelines and other support tools
- Arrives packaged in vacuum shrink wrap with a desiccant bag to ensure controlled humidity levels in transit
- RoHS 2 certified – Free from harmful Heavy-Metals and Plasticizers
Wide, Vivid Color Range with Pantone References
We spent significant time to test and characterize each new PLA or ABS material, diameter and color combinations in many different print tests.
On top of the manufacturing quality control, we re-run these printing tests on range of 7 different models of 3D printers including Bowden and Direct-Drive setups.
We care a great deal about our environment and are trying to strike a balance between business convenience and protecting our Earth’s resources. Our PLA filament is made from renewable, non GMO polymer sources – namely plastics derived from corn starch
To meet all our customer’s needs, we do also offer a range of ABS products for specific applications that require higher operating temperatures that lie close to or beyond PLA’s melting point where ABS may provide a better solution.
Creating successful prints greatly depends on the correct print settings. There are a large number of factors influencing successful printing results.
To ensure results faster, we provide you with clear temperature and Slicer configurations reducing guess work and expensive experimentation.
Each spool is labeled with a QR-Code which provides direct access to the specific ExcelFil™ 3D Printing Filament support database entry.
|Diameter and Accuracy||2.85mm ±0.05mm and 1.75mm ±0.05mm|
|Polymer Melt Point||210°C||260°C|
|Print Temperature||Specific Temperatures in our
|Spool Dimensions||Outer Diameter: 200mm, Spool Hub Diameter: 32mm, Width: 60mm|
|Packaging||Vacuum-sealed with a sachet of desiccant|
|Ships in||Rugged cardboard protective shipping box|
|Box Size||212mm x 212mm x 75mm|
|Material Net Weight||1kg ±0.05kg|
Raw Material Food Contact FDA Approval
ExcelFil Natural Beige PLA (EF-PLA-XXX-NBEIG) is manufactured from materials which are approved by the FDA for food contact articles ( FCN No. 475). Please be aware, while the raw materials are compliant, your extrusion environment most likely is not, and we can take no responsibility for any contamination.
USD 49 / EUR 39 / AUD 50 / TWD 1600