Get preconfigured Slicer profiles for ExcelFil
We aim to provide pre configured profiles for different slicing software which you can easily import. They will preconfigure your software for the right extruder and bed temperatures, fan settings, diameters and some other important parameters that vary Slicer by Slicer.
Generate and Download Setting File
How to use with Slic3r
Please make sure you use a recent version (>=1.2.9) of Slic3r to get all the benefits.
You can import config bundles with Slic3r using the File menu:
“File > Load Config Bundle…” then point it at the downloaded profile file.
If you are using advanced mode, this will add new Profiles in your Filament Section as shown here.
How to use with Simplify3D
Please make sure you use a recent version (>=3.0) of Simplify 3D to get all the benefits.
To import the downloaded FFF profile, please go to the Menu at:
“File > Import FFF Profile”. Then if you go to your Process configuration, you will be able to see a new Profile named “ExcelFil Filament Presets”. This Profile will have adopted all you previous printer settings, however, you now can select the Filaments in the “Auto-Configure for Material” Dropdown.
How to use with Cura
Please make sure you use a recent version (>=2.1.3) of Cura to get all the benefits.
Please extract the downloaded ZIP file. The extracted folder will be called “Voltivo_Cura_Profiles”. Then copy or move the contents of the “Voltivo_Cura_Profiles” folder into your local Cura configuration “profile” folder
On a MAC, this will be located here: “~/.cura/profiles/”.
On Windows, this will be located here: “$User/AppData/Local/cura/profiles”.
On Linux, this will be located here: “~/.config/cura/profiles”.
After a restart of Cura, the Settings profiles then will the become available in the “Material:” Drop down as following:
How to use with KISSlicer
Please make sure you use a recent version (>=1.4) of KISSlicer to get all the benefits.
KISSlicer saves the presets in a file called “_materials.ini” which is located alongside the Executable. On Windows the “_materials.ini” should be in the same directory as the kisslicer.exe. On a MAC, drop the “_materials.ini” into the same folder as the Application resides.