Print Temperatures Guidelines

We spend significant time to test and characterize each new PLA or ABS material, diameter and color combination in many different semi-automated print tests.

Tweet Your ExcelFil Print

Above and beyond the manufacturing quality control, we re-run these printing tests on different 3D printers like Makerbot Replicators (PLA 1.75), an Ultimaker 1 (All Materials 3mm), an UP Plus (ABS 1.75) and 2 RepRap variants (All Materials 1.75mm).

Based on these tests, we can give you very accurate temperature recommendations in which temperature range our filaments print best.

Download complete slicer profiles for Slic3r, Simplify3D and Kisslicer

Our Slicer Profile Generator will give you downloadable configurations for your preferred slicer with the optimal print settings.